Apple iOS 10.1.1 Approved

Seattle Avionics has approved the use of Apple iOS version 10.1.1 with the current version of FlyQ EFB for iPad, FlyQ Pocket for iPhone/iPad, and SmartPlates & Charts for iPhone/iPad apps.

How to find the version number for Seattle Avionics FlyQ EFB

  1. Open FlyQ EFB app
  2. Go to the Settings screen (gear icon)
  3. The version number is at the top right. Example: v2.3.1

How to find the version number for Apple iOS

  1. Open the Settings app
  2. Go to General
  3. Go to About
  4. The iOS version number is under ‘Version’. Example: 9.1 (13B143)

How to update a Seattle Avionics app

  1. Open the App Store app
  2. Go to ‘Updates’ screen (bottom right)
  3. Look for the app icon and tap on ‘UPDATE’

How to update Apple iOS

  1. Open the Settings app
  2. Go to General
  3. Go to Software Update
  4. Tap on ‘Download and Install’

*Please note that beta (aka “test”) versions of Apple iOS are not finished products, have not been fully tested, and contains bugs. Seattle Avionics does not support beta versions of Apple iOS for use with any of its apps.

Apple iOS 10.1 Approved

Seattle Avionics has approved the use of Apple iOS version 10.1 for with the current version of FlyQ EFB for iPad, FlyQ Pocket for iPhone/iPad, and SmartPlates & Charts for iPhone/iPad apps.

How to find the version number for Seattle Avionics FlyQ EFB

Open FlyQ EFB app
Go to the Settings screen (gear icon)
The version number is at the top right. Example: v2.3.1
How to find the version number for Apple iOS

Open the Settings app
Go to General
Go to About
The iOS version number is under ‘Version’. Example: 9.1 (13B143)
How to update Seattle Avionics FlyQ EFB (free)

Open the App Store app
Go to ‘Updates’ screen (bottom right)
Look for FlyQ EFB app icon and tap on ‘UPDATE’
How to update Apple iOS

Open the Settings app
Go to General
Go to Software Update
Tap on ‘Download and Install’
*Note that beta (aka “test”) versions of Apple iOS are not finished products, have not been fully tested, and contains bugs. Seattle Avionics does not support beta versions of Apple iOS for use with any of its apps.

iOS 10.1 Testing

Our lab team is testing Apple iOS 10.1 for compatibility with FlyQ EFB for iPad, FlyQ Pocket for iPhone, and SmartPlates and Charts for iPhone/iPad. We will post the results in a new blog entry when testing is complete.  As always with any new iOS release, we advise caution before installing on a device you rely upon for flight.

Be sure to use the “Follow” section on the right side of this page to be notified by email as we test iOS 10.1 and make other new Blog entries.  If you don’t see “Follow” it means you’re already signed-up for email alerts.

Please note that iOS 10 doesn’t support all models of iPhone or iPad devices. If your device is not supported by iOS 10, iOS 9.3.5 has been approved for use with our apps.

Apple iOS v10.0.1 Approved for Use

Seattle Avionics has approved the use of Apple iOS version 10.0.1 for with the current version of FlyQ EFB, FlyQ Pocket, and SmartPlates & Charts iOS based apps.

Known Issue:  In both FlyQ EFB 2.3.3 and 2.4, Send to Dynon and Receive from Dynon on Plans/NavLog will not appear even when connected to Dynon SkyView.

How to find the version number for Seattle Avionics FlyQ EFB

  1. Open FlyQ EFB app
  2. Go to the Settings screen (gear icon)
  3. The version number is at the top right. Example: v2.3.1

How to find the version number for Apple iOS

  1. Open the Settings app
  2. Go to General
  3. Go to About
  4. The iOS version number is under ‘Version’. Example: 9.1 (13B143)

How to update Seattle Avionics FlyQ EFB (free)

  1. Open the App Store app
  2. Go to ‘Updates’ screen (bottom right)
  3. Look for FlyQ EFB app icon and tap on ‘UPDATE’

How to update Apple iOS

  1. Open the Settings app
  2. Go to General
  3. Go to Software Update
  4. Tap on ‘Download and Install’

*Please note that beta (aka “test”) versions of Apple iOS are not finished products, have not been fully tested, and contains bugs. Seattle Avionics does not support beta versions of Apple iOS for use with any of its apps.

Apple iOS 9.3.5 Approved for Use

 

Seattle Avionics has approved the use of Apple iOS version 9.3.5 for with the current version of FlyQ EFB, FlyQ Pocket, and SmartPlates & Charts iOS based apps.

How to find the version number for Seattle Avionics FlyQ EFB

  1. Open FlyQ EFB app
  2. Go to the Settings screen (gear icon)
  3. The version number is at the top right. Example: v2.3.1

How to find the version number for Apple iOS

  1. Open the Settings app
  2. Go to General
  3. Go to About
  4. The iOS version number is under ‘Version’. Example: 9.1 (13B143)

How to update Seattle Avionics FlyQ EFB (free)

  1. Open the App Store app
  2. Go to ‘Updates’ screen (bottom right)
  3. Look for FlyQ EFB app icon and tap on ‘UPDATE’

How to update Apple iOS

  1. Open the Settings app
  2. Go to General
  3. Go to Software Update
  4. Tap on ‘Download and Install’

*Please note that beta (aka “test”) versions of Apple iOS are not finished products, have not been fully tested, and contains bugs. Seattle Avionics does not support beta versions of Apple iOS for use with any of its apps.